Comments(0)
What are Exterior window blinds?
Exterior roller custom blinds are usually made of wood, steel, aluminum, or vinyl. They’re mounted above the window. Side channels guide them as they’re lowered and raised. When you lower these discount blinds completely, their slats meet and provide shade. If partially raised, the window blinds allow some air and daylight to enter through windows.
Comments(0)
Mini window treatments to be Furnished and Installed
If circumstances beyond the control of the contractor result in a late delivery, it is the responsibility and obligation of the contractor to make the details known immediately to the contract administrator. Delivery/Installation: This contract provides for window coverings to be furnished only or furnished and installed. In instances where furnish and install is requested, window treatments are to be delivered and installed within a guaranteed delivery and installation schedule.
Comments(0)
Mini Blind Installation Documentation
The contractor(s) shall provide a copy of all invoices and over per location and a copy of the floor layout to show room numbers and the number of windows with installation.
Invoices shall indicate:
a) Type of window blinds
b)Number of custom blinds at each size
c)Square footage of each blind
d)Total number of discount blinds
e)Total square footage
f)Quantity Discounts
g)Itemized Additional Charges
h)Installation Charge
i)Total Price
Such invoices shall be forwarded to the attention of
Quality Assurance Inspection.Invoices shall be sent on accumulative monthly basis.Failure of the contractor to comply with this requirement may result in the removal of the contractor from the contract.Upon acceptance by quality assurance inspection to determine compliance with specifications, terms and conditions of this contract, approval for payment of this invoice will be forwarded to the using agency.INVOICES WILL NOT BE PAID BY THE USING AGENCY UNTIL QUALITY ACCEPTANCE HAS BEEN APPROVED.
Comments(0)
Select window coverings Fastest Growing Brand of Window window treatments
Select window coverings.com is the fastest growing brand of Window window treatments. There is broad selection of Window Coverings, Shades, Discount window coverings, available for commercial and household uses. Top quality window treatments at low prices. Many stores offer discount window coverings, shades, shutters, window coverings, and more. Window window treatments and shades are a great way to cover your windows at discount window coverings prices. Most stores offer a great selection of shades. Window coverings can give your home a whole new look. There are many offers window coverings, window treatments, shades, and more at discount window coverings prices. Cheap window treatments are available at most stores which offer inexpensive window window coverings.
Comments(0)
THANK YOU LETTERS AND NOTES
“Thank you” is a powerful statement that is seldom heard. Every thank you is an opportunity to sell your qualifications and to leave a fresh impression in the mind of the reader. Send a cover letter or note to employers and employment contacts whenever they have extended themselves in any way on behalf of your job search. At the minimum, a written thank you should be sent after all interviews.
Comments(0)
Faux Wood Wide Selection of Sizes
Fauz wood window coverings are a beautiful addition to any home. Not only are Faux Wood window treatments attractive, they can help reduce your heating and air conditioning bills. If you are looking for a change of pace Faux Wood window coverings can give your home or apartment that designer look and feel.
Basic Blind 23×64 Faux Wood - Natural
Basic Blind 27×64 Faux Wood - Natural
Basic Blind 29×64 Faux Wood - Natural
Basic Blind 30×64 Faux Wood - Natural
Basic Blind 31×64 Faux Wood - Natural
Basic Blind 32×64 Faux Wood - Natural
Basic Blind 34×64 Faux Wood - Natural
Basic Blind 35×64 Faux Wood - Natural
Basic Blind 36×64 Faux Wood - Natural
Basic Blind 34×72 Faux Wood - Natural
Basic Blind 35×72 Faux Wood - Natural
Faux wood window treatments are offered at a number of commercial stores. Many stores offer installation services, but of course you can install them yourself! Look around, there are many attractive deals and discounts available, especially if you are planning on installing faux wood window coverings throughout your home!
Comments(0)
New Venetian Blind Created
RADIANCE is description of a set of new venetian discount blinds. The depth of the window blinds (X dimension) is given first, followed by the width (Y dimension), followed by the height (Z dimension). The number of slats to place evenly within this height is given as nslats. The angle of the blind, where zero is perfectly horizontal and a positive angle tilts the positive X edge upwards, is given in degrees. The custom blinds are initially situated so that the corner of the bottom blind isheight/nslats/2 above the XY plane, and all coordinates are positive.Each new slat is placed height/nslats above the previous one, until the top slat is at height - height/nslats/2 . The discount blinds may of course be moved from this starting point with the xform(1) command.
Comments(0)
Cleaning up after Mini Blind Installations
Upon completion of installation, vendor shall clean up and dispose of all debris occasioned by his work. All debris is to be removed from premises and rooms shall be left broom clean. If existing window treatments are removed, disposal of such should be at the direction of the using agency and if desired, the responsibility of the contractor. Disposal of window coverings may be off-premises, at the direction of the user.
14.B. Labels
All window treatments sold under this contract shall be labeled inside the headrail with CONTRACTORS name and date of shipment. If the contractor installs window coverings, the date of installation must be shown in place of the shipment date. Failure to identify window treatments will result in rejection by Quality Assurance Inspectors and invoices will not be released until such omission is corrected.
15. Quality Acceptance Inspection
Installations in excess of $2500.00 are required to have a Quality Assurance Inspection.
Comments(0)
Government Seeking Window Blind Inovation
“25 percent of the energy used to heat and cool buildings goes right out the window,” Secretary of Energy Spencer Abraham said. “The innovative technologies receiving funding today will improve U.S. industrial competitiveness while reducing energy use, helping to make our nation more secure.” Existing window treatments and shades can be improved to help reduce energy costs.
The Energy Department selected 19 organizations out of 202 proposals to receive funding as part of two DOE programs: Inventions and Innovation (I&I), and the National Industrial Competitiveness through Energy, Environment and Economics (NICE3) initiative.
Comments(0)
Sign Your Letter
Consider signing the letter in blue ink. It implies the letter is original. The only other ink color to use is black. Never use any other color on the cover letter.
Comments(0)
Easy Resumes
Modern technology has added a new twist to preparing resumes andcover letters. The availability of personal computers and laser printers has raised employers expectations of the quality of resumes andcover letters applicants produce. Electronic mail, Internet postings, and software that reads resumes help some employers sort and track hundreds of resumes. Technology has also given cover letter writers greater flexibility; page limits and formatting standards are no longer as rigid as they were several years ago. The only rule is that there are no rules, says Frank Fox, executive director of the Professional Association of Resume Writers. Resume should be error free no typos or spelling mistakes but beyond that, use any format that conveys the information well.
Comments(0)
North Carlolina General Contract Terms for custom blinds Installation
The Dize Company will complete on-site measurements within 10 to 18 days after request from the user. Contract Shading Systems will complete on-site measurements within 10 to 20 days after request from the user. In the event the on site measuring is not completed within the contracted time period, the contractor may be held in default in accordance with paragraph 1, DEFAULT AND PERFORMANCE BOND in the North Carolina General Contract Terms and Conditions, and the state may procure the articles or services from other sources and hold the contractor responsible for excess cost occasioned thereby.
It is important that agencies make the contract administrator aware of any measurement problems.
Comments(0)
Invoicing for Mini Blind Installation
The contractor shall invoice at the actual installation cost of the window treatments, per location.The minimum installation charge shall apply only in cases where the installation cost of the window coverings exceeds the minimum installation charge.
*Location is defined as one or more buildings within close proximity to one another requiring installation service. The minimum installation charge is not intended to apply to each building at a single location. When installation can be completed at more than one building, and it is not necessary for the installers equipment to be transported by vehicle between the installation sites, only one minimum installation charge should be applied.
Comments(0)
Mini Blind Contract Responsiblities
It is the responsibility of the contractor to call on any state agency, institution, public school, university, or participating non-state agency to discuss requirements and upon written request, take and guarantee measurements. Contractor is obligated to respond to such requests. Contractors responding to telephone requests for measurements will do so at their own risk. The State will not be responsible for misunderstandings resulting from oral requests.
Comments(0)
North Carlolina General Contract Terms for window coverings Installation
The Dize Company will complete on-site measurements within 10 to 18 days after request from the user. Contract Shading Systems will complete on-site measurements within 10 to 20 days after request from the user. In the event the on site measuring is not completed within the contracted time period, the contractor may be held in default in accordance with paragraph 1, DEFAULT AND PERFORMANCE BOND in the North Carolina General Contract Terms and Conditions, and the state may procure the articles or services from other sources and hold the contractor responsible for excess cost occasioned thereby.
It is important that agencies make the contract administrator aware of any measurement problems.
Comments(0)
Mini Blind Contract Responsiblities
It is the responsibility of the contractor to call on any state agency, institution, public school, university, or participating non-state agency to discuss requirements and upon written request, take and guarantee measurements. Contractor is obligated to respond to such requests. Contractors responding to telephone requests for measurements will do so at their own risk. The State will not be responsible for misunderstandings resulting from oral requests.
Comments(0)
Cover Letters
However, the no-rules rule does not mean anything goes. You still have to consider what is reasonable and appropriate for the job you want. Advertisements for a single job opening can generate dozens, even hundreds, of responses. Busy reviewers often spend as little as 30 seconds deciding whether a rsum deserves consideration. And in some companies, if a cover letter is not formatted for computer scanning, it may never reach a human reviewer.
Comments(0)
Mini Blind Color Selection
Colors will be chosen from standard color selection (minimum 25) and alabaster must be available.window blinds are to be delivered within 21 days ARP (less holidays). Orders are not to be held to meet a minimum order quantity. Orders of ten (10) or more custom blinds will be charged at one price and orders of nine (9) or less will be charged at separate price.No additional charge for hold downs for door installation.
Comments(0)
Blind Measuring Requirements
In situations where the contractor will be installing window blinds and the agency needs assistance in performing measurements, it is the obligation of the contractor to take on-site measurements. Requests for on-site measurements should be forwarded to the contractor in writing, with the using agencys purchase order number, to be confirmed once the actual measurements are complete and the estimate finalized. A purchase order should result in all instances, unless the estimate exceeds budgetary allowances. Any abuse of this service by agencies should be reported to the contract administrator.
All requests for measurements should be made in written form by the using agency. The State will not be responsible for and misunderstandings that results from oral requests.
Comments(0)
Company to Install and Deliver Mini window coverings
A window treatments Company will complete delivery and installation within 20 to 30 days after receipt of order.Contract Shading Systems will complete delivery and installation within 20 to 40 days after receipt of order. In the event the delivery is not received within the contract delivery period, the contractor maybe held in default in accordance with paragraph 1, DEFAULT AND PERFORMANCE BOND in the North Carolina General Contract Terms and Conditions, and the state may procure the articles or services from other sources and hold the contractor responsible for excess cost occasioned thereby. It is important that agencies make the contract administrator aware of any delivery or installation problems.
Comments(0)
Window Treatment Inovations Funding
Among the projects selected for funding are:
Advanced Processing Technology of Electrochromic Windows: A process to develop new film patterning techniques for energy-saving smart windows. The process improves visible light transmission and reduces glare, while retaining a clear view and increasing thermal comfort. Also, encouraging innovation with window discount blinds and shades to help increase energy savings.
An Indirect Route for Ethanol Production: A process to develop fuel ethanol from renewable resources to achieve savings of 80 percent in energy consumption. The process helps U.S. farmers create a market for corn supplies and increases national energy security.
Manufacturing Ceramic Products from Fiberglass Waste: A low-cost energy method of completely transforming fiberglass waste into a dense ceramic product that can be used for window window blinds, shades, as well as other uses. The process could eliminate the need for disposal of 260,000 tons of fiberglass waste annually.
Near-Infrared (NIR) Veneer Strength Sensor for Forest Industry: Use of NIR sensors instead of ultra-sonic technology allows testing for veneer wood strength before drying. The NIR technology will improve process efficiency and reduce product waste, and is expected to save about $23,000 annually in energy costs.
The Force Modulator: A durable sheet metal technology for the steel industry that allows proper control of press forces during part forming.
Comments(0)
Energy Efficiency Funding
For more than 20 years, DOE’s I&I program has funded more than 500 energy efficient inventions with nearly 25 percent of them reaching the marketplace. Cumulative sales for those products total nearly $710 million.
DOE’s NICE3 program provides funding to state and industry partnerships (large and small business) for projects that demonstrate advances in energy efficiency and clean production technologies like advanced window blind and window shade systems. State and industry partnerships are eligible to receive a one-time grant of up to $525,000. The industrial partner may receive a maximum of $500,000 in federal funding. The non-federal cost share must be at least 50 percent of the total cost of the project.
Comments(0)
Job Match or “T”
It’s always important to match your qualifications to the job and/or employer in the cover letter. This is generally done as part of the body of the letter. In the “T” letter format this is done as bullet points targeting the specific requirements and your corresponding qualifications. Some sources for information to help you match your qualifications include: employment advertisements, company websites, position descriptions, phone conversations with the employer and informational interviews.
Comments(0)
What are Exterior window treatments?
Exterior roller window coverings are usually made of wood, steel, aluminum, or vinyl. They’re mounted above the window. Side channels guide them as they’re lowered and raised. When you lower these window treatments completely, their slats meet and provide shade. If partially raised, the window coverings allow some air and daylight to enter through windows.
Comments(0)
Window discount blinds Heat Reducing Capacity
Window window blindsvertical or horizontal slat-typeare more effective at reducing summer heat gain than winter heat loss.Because of the numerous openings between the slats, it’s difficult to control heat loss through interior window custom blinds, but the slats offer flexibility in the summer. Unlike shades, you can adjust the slats to control light and ventilation. For example, when completely closed and lowered on a sunny window, highly reflective discount blinds can reduce heat gain by around 45%. They can also be adjusted to block and reflect direct sunlight onto a light-colored ceiling. A light-colored ceiling will diffuse the light without much heat or glare.
Comments(0)
What are Smart Windows?
“Smart Windows That Don’t Need window treatments, Ultra-durable Sheet Metal Presses and an Ethanol Process to Improve Market for Corn
Energy Department Awards $4.4 Million to Develop Energy-Efficient TechnologiesTo improve energy efficiency in buildings and in manufacturing, the Department of Energy (DOE) announced awards today totaling $4.4 million to advance energy efficient, environmentally clean production and building technologies including all types of existing window coverings or shade technologies.
Comments(0)
What are Smart Windows?
“Smart Windows That Don’t Need discount blinds, Ultra-durable Sheet Metal Presses and an Ethanol Process to Improve Market for Corn
Energy Department Awards $4.4 Million to Develop Energy-Efficient TechnologiesTo improve energy efficiency in buildings and in manufacturing, the Department of Energy (DOE) announced awards today totaling $4.4 million to advance energy efficient, environmentally clean production and building technologies including all types of existing window blinds or shade technologies.
Comments(0)
What is a Mini Blind?
The long horizontal slats are held one above the other by the rungs of ladder cords shaped like a ladder. The lower ends of the legs of the ladder cords are secured to the long rail under the slats. Their upper ends are attached to the drive rod in the housing, the elongated box above the slats. As the drive rod rotates, one leg of each ladder cord moves up while the other moves down, causing the angle of the slats to change. In one design, this rotation is achieved by pushing up or pulling down on a long handle called a tilt wand connected to the drive rod by a lever. Lift cords along the ladder cords are also attached to the rail. They pass through holes in the slats and into the housing above, where they go over pulleys, combine and exit through the cord lock. For safety it’s important that the lock always work. A downward pull on the main lift cord raises the slats by the cords pulling up the rail below the slats. The cord lock holds the main lift cord to keep the slats up until the cord is pulled to release the lock. The safety lock made the cord lock easier to use.
Comments(0)
Window Blind Blogs
Update: We are starting some new forums, blogs and sites, We are considering opening a Open Source Forums at Adison U, any feedback on the idea of doing this and your comments on if you would participate are welcome. We also have opened a Ecology Directory a technology forum. Any feedback on our sites will help.
Comments(0)
What to do if Circumstances prevent Delivery?
If circumstances beyond the control of the contractor result in a late delivery and installation, it is the responsibility and obligation of the contractor to make the details known immediately to the contract administrator.
Term Contract No. 870A
Comments(0)
New Venetian Blind Created
RADIANCE is description of a set of new venetian window treatments. The depth of the window coverings (X dimension) is given first, followed by the width (Y dimension), followed by the height (Z dimension). The number of slats to place evenly within this height is given as nslats. The angle of the blind, where zero is perfectly horizontal and a positive angle tilts the positive X edge upwards, is given in degrees. The window treatments are initially situated so that the corner of the bottom blind isheight/nslats/2 above the XY plane, and all coordinates are positive.Each new slat is placed height/nslats above the previous one, until the top slat is at height - height/nslats/2 . The window coverings may of course be moved from this starting point with the xform(1) command.